Click Here

 

 

Just about everyone seems to have their personal opinion when it comes to Hot Water Heater Repair.

Lots of modern residences make use of an electrical water heater for their heating system, because of its ease as well as ease of use. Nonetheless, much like any other electrical devices, problems might occur with its usage, all of a sudden. It can be really discouraging to awaken to a chilly shower as opposed to a hot one or having your bathroom with water that isn't warm sufficient or perhaps too warm. Whatever the case may be, water heater troubles can be quite aggravating. Thankfully, we have actually made a list of feasible solutions to your hot water heater issues. There are a variety of factors that might cause a number of these problems, it could be a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, ensure you switch off the main power supply for safety and security. Whatever the problem is, getting it repaired need to not posture too much of a problem if you comply with these actions:

 

Examine Your Power Supply:

As basic as this may appear, it is really needed. Without ample power, your water heater will not work. So the first thing to do when your water instantly stops working is to verify that it isn't a power issue. Examine if the fuse is blown out or the breaker stumbled. If the circuit breaker is the problem, just transform it off and on once again. Change any kind of busted or worn-out fuse. Check the device with power after these changes to see if it's now functioning.

 

Examine the Burner in the Water Heater:

If it's not a power issue, after that attempt having a look at your burner if it is still working. Check each of your burner to be sure the problem isn't with any of them. If any of them is defective, change that component and afterwards examine whether the warm water is back on.

 

Check Your Thermostat:

If your water heater still isn't working or the water coming out isn't hot enough, you may require to examine the temperature level setups on your top thermostat. Ensure the circuit breaker is switched off before doing anything. Open the access panel and press the red button for temperature reset above the thermostat. This ought to help heat the water. Turn the circuit breaker back on and also check if the problem has actually been settled.

 

Call A Specialist:

If after replacing all faulty parts and resetting your temperature, the water heater still isn't functioning, you might require to call a professional plumber for an expert viewpoint. The issue with your heater could be that the cold and hot faucets have actually been changed or it may be undersized for the amount of hot water needed in your home. Whatever the instance might be, an expert plumber would assist resolve the problem.

 

Conclusion

Water heater troubles are not always major. Many of them are due to small problems like a blown fuse or damaged heating element. Changing the damaged components must do the trick. However, if you are still incapable to fix the issue, give a call to your nearest plumber ahead to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

We hope you liked our post about What Would Cause My Electric Water Heater to Stop Working?. Thank you for taking time to read through our piece. Sharing is caring. One never knows, you might be doing someone a favor. We appreciate reading our article about No Hot Water — Water Heater Repair.

Schedule Free Estimate